OUR PRODUCTS

 ACCESSIBILITY:

  • Wedgelok standards 2.5m, 2m, 1.5m, 1.0m
  • Wedgelok ledgers 2.5m, 2m, 1.5m, 1,219m
  • Hook–on board 2.5m, 2m, and 1.5m
  • Cantilever Brackets 900
  • Wedgelok connectors
  • Connectors of 0.38kg
  • 610R /0 Wedgelok base Jack
  • Wheel heavy duty & brake
  • Steel Stairs 2.5/2.0 and 457/O Jacking Castor...

     

 SUPPORT:

  • 610R /0 Wedgelok base Jack
  • 610R /0 Wedgelok U – Head Jack
  • B – Clamp
  • Props
  • 3535Diagonal braces 2.5x2.5
  • Scaffolding Tubes 5501
  • Bckplate , pin and loop & eye bolt…
  • Wedgelok standards 2.5m, 2m, 1.5m, 1.0m
  • Wedgelok ledgers 2.5m, 2m, 1.5m, 1,219m

 

 FORMWORK:

  • Circular column box 3300 x 300; 3300x250; 3300x250
  • Economy panel 1200 x 230; 1200x300; 1200x450; 1200x600.
  • Economy channel 3000 x 125, 100, 75
  • Decking panel all the sizes
  • Heavy Duty key, heavy Duty wedge, PMI Wedge Assembly
  • Pin & Loop
  • External cor. Angle 1200x 50x50/3000x50x50
  • cor. panel 1200x150x150/1500x150x150

 

 BRACING:

  • Swivel Coupler 50x50
  • Swivel Coupler 50x50
  • Band only 60x50
  • B-Clamp & Pin & Loop

 

Use of some of our equipment:

  • ‘B’ Clamp: a clamp with two hook- shaped-prongs used for connecting tubular walers to the flanges of economy or wall form panels.
  • Band –and-plate coupler: a type of “U” shaped double coupler used for securing two tubes in parallel or at right angles to each other.
  • Base jack: a base plate, provided with a screw jack, which is used to ensure individual adjustment of the height of each leg of scaffold or support system.
  • Box floor centre: a telescopic sheet metal box beam of adjustable length used to support decking for a floor slab.
  • Brace: a scaffold tube fixed diagonally with respect to vertical or horizontal tubes of a scaffold, to ensure stability and to prevent distortion of the scaffolding.
  • Cantilever bracket: a fabricated bracket which connects onto the side of a standard. It provides an end or side extension to support a slab stop end or walkway access.
  • Channel: a narrow panel up to 3,0m in length (75 to 125mm wide) which serves a dual function of accommodating the tie system and acting as a soldier or leapfrog panel in the wall form panel system. The channel is also compatible to the economy panel system.
  • Column box: a vertical arrangement of prefabricated panels which when assembled will form the required shape of a specified concrete column.
  • Connector: a tubular component approximately 200mm long with a central flange. It aligns the ends of standards or tubular frames and has one hole at each end through which toggle pins can be passed, enabling the connected tubes to be used in tension.
  • Decking (deck panels): steel panels used to support a concrete slab or other member.
  • Economy panel: a steel formwork panel with built in stiffeners, enabling a reduction in the number of material required. It can easily be erected by unskilled labour. It is used to construct walls, columns, beams, slab stop ends, floors, and foundations.
  • Ledger: a longitudinal horizontal member fixed to the standards.
  • Prop: an adjustable telescopic compression member used as temporary support. It is made up of a tubular outer with an adjustable threaded collar (for fine adjustments) and a tubular inner with holes drilled along its length (for coarse adjustments).
  • Scaffold tube: this wall thickness high yield steel tube and other fittings like Swivel coupler are required for every ten square metres of wall area to ensure more stability.
  • Standard: a vertical tool used in the construction of tubular scaffolding or support work for transmitting a load to the base plate;
  • Toe board: a barrier along the sides and ends of platform and intended to prevent tools, materials and workers from falling or slipping off the platform.